Service Alerts - Samsung SCH-R390C User Manual

• For Call Vibrate, select On or Off, then press SET.
• For Caller ID Readout, select Ring Only, Caller ID + Ring, or
Name Repeat (Contacts only), then press SET.
Alert Sounds
You can select an individual tone to play for each of 6 types of
Alerts your phone can sound.
From the Settings menu select Sounds Settings
1.
Alert Sounds.
When you select Text Message, Picture/Video Message,
2.
Voicemail, Missed Call, Device Connect, or Emergency
Alerts, select an alert Tone to play, whether your phone
should Vibrate, and/or whether and how often your phone
should repeat a Reminder of any of these alerts.
When you select Device Connect, you can turn this alert On
3.
or Off.
Keypad Sounds
You can select one of two sounds for your phone to produce
when you press a key.
From the Settings menu select Sounds Settings
Keypad Sounds, then select Default or Lucid.
68
Keypad Volume
You can select the volume at which your phone produces Keypad
Sounds.
From the Settings menu select Sounds Settings
Keypad Volume, then press the Navigation key Left to
decrease the volume, or right to increase the volume.
Digital Dial Readout
When selected, the phone reads each digit out loud.
From the Settings menu select Sounds Settings
1.
Digit Dial Readout.
Highlight On or Off and press SET.
2.

Service Alerts

Your phone will sound an alert when you are Roaming or out of
your service area, when your calling minutes reaches one, or
when a call connects.
From the Settings menu select Sounds Settings
1.
Service Alerts.
Select Roam/SVC Alert, Minute Beep, or Call Connect, then
2.
highlight On or Off and press SET.