Table of Contents
Advertisement
Additional settings
From the Call Settings menu, tap Additional settings.
1.
Tap one of the following options:
2.
• Caller ID: allows you to choose how your Caller ID will be displayed.
Select Network Default, Hide number, or Show number.
• Call waiting: the network service informs you when someone is
trying to reach you during another call. Tap to activate.
• Auto redial: automatically redials the last number if the call was
either cut off or was unable to connect. Tap to activate.
• Noise suppression: Your phone is equipped with an advanced
voice processing chip that delivers clear mobile calls by
suppressing background noise, intermittent sounds (like a siren or
nearby conversation), and echoes, allowing you to hear and be
heard nearly anywhere. Tap to activate.
• Fixed Dialing Numbers: allows you to restrict outgoing calls to a
limited set of phone numbers.
160
Using Fixed Dialing Numbers
Enabling FDN
1.
From the Call Settings menu, tap Additional settings
Fixed Dialing Numbers.
Tap Enable FDN.
2.
At the prompt, enter your PIN2 code and tap OK.
3.
FDN is enabled.
To enable FDN after it has been disabled, tap Disable FDN,
4.
enter your PIN2 code and tap OK.
Important! Not all SIM cards use a PIN2 code. If your SIM card
does not, this menu does not display.
The PIN2 code is provided by your carrier. Entering an
incorrect PIN2 code could cause the phone to lock.
Contact customer service for assistance.
Changing the PIN2 Code
From the Call Settings menu, tap Additional settings
1.
Fixed Dialing Numbers.
2.
Tap Change PIN2.
At the prompt, enter your old PIN2 code.
3.
At the prompt, enter a new PIN2 code.
4.
Advertisement
Table of Contents
