Table of Contents
Advertisement
Note: Pairing between two Bluetooth devices is a one-time
process. Once a pairing has been created, the devices will
continue to recognize their partnership and exchange
information without having to re-enter a passcode again.
Disconnecting a paired device
Disconnecting a paired device breaks the connection between
the device and your phone, but retains the knowledge of the
pairing. At a later point when you wish to reconnect the device,
there is no need to setup the connection information again.
Verify your Bluetooth is active.
1.
From the Bluetooth settings page, tap the previously paired
2.
device (from the bottom of the page).
Tap OK to confirm disconnection.
3.
– or –
From the Bluetooth settings page, touch and hold the
name of the previously paired device, and select
Disconnect.
Note: Disconnections are manually done but often occur
automatically if the paired device goes out of range of your
phone or it is powered off.
Deleting a paired device (unpair)
Deleting a device from your list removes its "connection record"
and upon reconnection would require that you re-enter all the
previous pairing information.
Verify your Bluetooth is active.
1.
From the Bluetooth settings page, touch and hold the
2.
name of the previously paired device (from the bottom of
the page). This opens the connected device's menu
options.
Tap Unpair to delete the paired device.
3.
Sending Contacts via Bluetooth
Depending on your paired devices' settings and capabilities, you
may be able to send pictures, Contact information, or other items
using a Bluetooth connection.
Note: Prior to using this feature, Bluetooth must first be enabled,
and the recipient's device must be visible.
Verify your Bluetooth is active.
1.
From the Home screen, tap
2.
Press
Import/Export
3.
.
Contacts
Send namecard via.
Connections
125
Advertisement
Table of Contents
