Table of Contents
Advertisement
Resolution: allows you to set the image size to: 8M (3264x2448), W6M
(3264x1836), 3.2M (2048x1536), W2.4M (2048x1152), W0.9M (1280x720), or 0.3M
(640x480).
White balance: allows you to set this option to one of the following choices: Auto,
Daylight, Cloudy, Incandescent, or Fluorescent.
ISO: ISO determines how sensitive the light meter is on your digital camera. Choose
from Auto, 100, 200, 400, or 800. Use a lower ISO number to make your camera
less sensitive to light, a higher ISO number to take photos with less light, or Auto to
let the camera automatically adjust the ISO for each of your shots
Metering: allows you to set how the camera measures or meters the light source:
Center-weighted, Spot, or Matrix.
Anti-Shake: reduces image blur due to the movement of the subject of the photo or
hand movement.
Auto contrast: provides a clear image even under backlight circumstances where
intensity of illumination can vary excessively.
Guidelines: allows you to turn the guidelines On or Off.
Image quality: allows you to set the image quality to: Superfine, Fine, or Normal.
GPS tag: allows you to turn GPS On or Off (also known as Geotagging). The
location of where the picture is taken is attached to the picture. (Only available in
Camera mode.)
Storage: allows you to configure the default storage location for images or videos as
either Phone or MicroSD card (if inserted).
Reset: allows you to reset all camera or camcorder settings to the default values.
Camcorder Settings
Open the menu panel to change the camcorder settings. You can also switch between photo
and video modes from the menu panel.
Change Advanced Settings
To change the advanced settings on your camcorder, refer to the following procedures.
► Tap
in the menu panel to display the Settings menu and access more camera
settings. You can change the following settings from the Settings menu:
Edit shortcuts: allows you to set shortcut icons for the settings that you use the
most.
Camera and Video
184
Advertisement
Table of Contents
