Advertisement
» Tip: To avoid unintentional switching of buttons during
process, you can also activate the key-lock function manually
by sliding and holding the key-lock button ( ).
» Note: The appliance is equipped with an auto-shut off
function. After 60 minutes, the appliance switches off
automatically. You can re-start the appliance by pressing and
holding the
4 Slide the straightening plates lock ( ) to
arms.
5 Comb your hair and take a section that is not wider than 5cm
for straightening.
6 Place it between the straightening plates ( ) and press the plate
arms together.
7 Slide the straightener down the length of the hair in a single
motion (max. 5 seconds) from root to end, without stopping to
prevent overheating.
7R FUHDWH ÁLFNV WXUQ WKH VWUDLJKWHQHU KDOIFLUFOH LQZDUGV
‡
(or outwards) when it reaches the hair ends. Hold the
straightener in that position for 2 to 3 seconds, and then
release it.
8 After 20 seconds, repeat step 6 and 7 until you achieve the
desired look.
9 To straighten the rest of your hair, repeat steps 5 to 7.
10 To re-style your hair, press and hold style refresh button ( )
for 3 seconds to switch on the touch-up function. This function
ensures the right result with a reduced temperature and better
protection.
» When the function is on, the indication "STYLE REFRESH"
( ) is displayed and the temperature indication disappears.
11 Press the style refresh button again, and the previous
straightening temperature setting appears.
button until the LCD screen lights up.
to unlock the plate
Advertisement
