Table of Contents
Advertisement
Switching the system on/off
●
Press STANDBY -ON B (B on the remote
control).
➜
"HELLO" is displayed briefly. The system will
switch to the last selected source.
●
Press DISC, TUNER or USB/AUX on the
remote.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY -ON B (B on the remote
control).
➜
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Sound Control
DBB, DSC and LOUDNESS sound features
cannot be activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●
Press LOUD/DBB on the remote control once
to enable DBB feature.
➜
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press DSC on the remote repeatedly to select:
CLASSIC, JAZZ, ROCK, POP or FLAT (for DVD:
NORMAL, CONCERT, DRAMA, ACTION or
SCI-FI).
Basic Functions
LOUDNESS
LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
●
Press LOUD/DBB on the remote control
twice to enable LOUDNESS feature. Press the
same button again to disable both DBB and
LOUDNESS features.
➜
icon appears/disappears after this feature
is enabled/disabled.
Volume control
Press VOLUME -/+ (VOL +/- on the remote
control) to increase or decrease the volume
level.
➜
"VOLUME XX" is displayed on the display
panel. "XX" denotes the volume level.
To listen through the headphone
●
Connect the headphone plug to the n socket
on the front panel of the DVD player.
➜
The speakers will be muted.
To switch off the volume temporarily
●
Press MUTE on the remote control.
➜
Playback will continue without sound and
"MUTING" flashes.
●
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Dimming the display screen
●
Press DIM repeatedly to select different levels of
brightness for the display screen.
17
Advertisement
Table of Contents
Troubleshooting
