Advertisement
1
Push Cyclone release catch forward to
1
free Cyclone assembly.
Pull Cyclone assembly away from the
2
machine.
If the brushbar is obstructed, a loud ratchet warning noise will be heard. Pull the cleaner away and it will automatically re-set itself.
For thread removal, unplug cleaner and carefully cut away threads from brushbar.
1
If ratchet warning noise continues, stop
1
vacuuming, turn off the machine and
unplug. To free the brushbar, lie the
machine on its front to reveal the soleplate.
DYSON CUSTOMER HELPLINE: 0990 275104
Bin emptying and brushbar
Do not fill bin above maximum line.
2
Push bin release catch forward to free
3
the bin.
Wrap a plastic bag firmly around the
4
rim of the clear bin and empty (wait
ten seconds to allow dust to settle).
2
Using a coin, undo the three yellow
2
fasteners.
Remove soleplate and clear the
3
brushbar obstruction.
8am to 8pm, 7 days a week
Keep small holes
clear of dust and fluff.
3
5
3
4
Optional
5
4
To clean bin, wash in warm water. Do
not remove bin inner and seals, and
ensure bin is dry before reassembling.
End cap of brushbar
4
Raised section
To replace brushbar, align and locate
in slots. Rotate until the end caps click
into place. Rotate brushbar to allow belt
to centralise, then replace soleplate.
Advertisement
