Table of Contents
Advertisement
8 Upgrade your TV software
Philips continuously tries to improve its products and we strongly
recommend that you upgrade the TV software when upgrades are available.
New software can be downloaded from our website at
www.philips.com/support using the model number of your TV (e.g.
46PFL3706) to find information.
Checking your current software version
1
Press MENU on the remote control and select [Features] >
[Current Software Info].
» The version and a description of the current software is
displayed, then press OK.
Picture
Sound
Release Version:
Setup
XXXXXXX_XXX_X_XXXX
Features
Language
USB
2
Press MENU to exit.
Preparing for the software upgrade
You require the following equipment:
•
A PC with web browsing capability.
•
An archive utility that supports the ZIP-format (e.g. WinZip for
Windows or StuffIt for Mac OS).
•
An empty clean formatted USB stick.
Note
•
Only FAT/DOS-formatted portable memory is supported.
•
New software can be downloaded from www.philips.com/support
•
Use only software upgrades that can be found on the Philips web site.
Warning
•
When the software upgrade is running, don't press any buttons.
•
Do not remove the USB storage device during the software upgrade.
•
If an error occurs during the upgrade, retry the procedure or contact your dealer.
Downloading the software
1
On your PC, open a web browser and go to
www.philips.com/support
2
Find information and software related to your TV and download
the latest software upgrade file to your PC.
3
Decompress the ZIP-file.
4
Copy the upgrade file to the root directory of the USB storage
device.
26
EN
Upgrading software
1
Prepare the software upgrade (see 'Preparing for the software
upgrade' on page 26).
2
If the TV is on, press . POWER at the side of the TV.
3
Connect your USB storage device with the update file to the USB
port on the side of your TV.
4
Switch on the TV.
Back
5
Read the on-screen instructions and confirm that you want to
continue with the installation.
6
When the software upgrade is complete, remove the USB storage
device.
7
Press . POWER at the side of the TV to make sure the unit goes
to standby mode.
8
Switch on the TV.
•
» The TV scans the USB storage device for the upgraded
software and automatically enters upgrade mode.
Software upgrade in progress. Please wait.
Do not remove the USB storage device or turn the TV off
while upgrade is in progress.
Downloading...
60%
» The TV starts up with the new software.
The following messages are displayed without starting
software upgrade when it doesn't fulfill the upgrade
conditions.
The version of this update file is the same or older
than the current version.
Please check the file and try again.
Hide quick links:
Advertisement
Table of Contents
