Reset The Factory Settings; How To Upgrade The Tv Software - Philips 32PFL7532D User Manual

6.9 Reset the Factory settings
This allows you to reset most of the predefined
factory states.
Select and press the π key.
1
Press the OK key to erase settings and
2
reset them to their default values.
TV menu
Installation
.............
Time zone
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
Info
6.10 How to upgrade the TV software
This allows you to upgrade your TV software
using a USB device.
USB device upgrade
It is possible to initiate an upgrade procedure
from a USB device (before you start up the
TV). The memory device must be filled with
the appropriate upgrade image (and structure)
which can be found on the www. philips.com/
software website.
How to upload a new software version on
your memory device, see 'Philips TV software
upgrade with portable memory', p. 53.
Automatic software announcement (if
present)
When you switch on your TV a message may
appear that a new software upgrade is available.

Factory settings
Reset
Press the red colour key on your remote
1
control if you want to be reminded later on.
Press the green colour key on your remote
2
control to confirm you have read the
message.
• Once you have confirmed, the message
will not pop up again. If however, you
want to see the last broadcasted
announcement again, select
Announcement in the Software
upgrade menu.
Note
As long as the software upgrade has not been
executed, the message will be available.
TV menu
Installation
.............
Time zone
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
Info
Software upgrade
Current softw. info
Local upgrades
Announcement