Table of Contents
Advertisement
Agitator
Holder
Filter
End Cap
E-Clip
Agitator Assembly
Brush
Spacers
Brushes
Agitator Shaft
Cleaning Agitator
➢ Clean agitator after every five uses
➢ Remove lower plate. See:
➢ Cut off any hair, thread, string,
➢ Remove agitator. See: "Replacing
➢ Remove any string or debris located
➢ Reinstall agitator and lower plate.
- 46 -
Agitator
Pulley
and every time the belt is replaced.
"Removing and Installing Lower
Plate" (page 40).
carpet pile, and lint entangled
around agitator with a pair of
scissors.
Belt" (page 42).
on the end caps, washers or agitator
shaft.
See: "Removing and Installing
Lower Plate" (page 40)
End Cap
Filter
Spacer
Advertisement
Table of Contents
