Panasonic HX-WA2A Owner's Manual page 177

Problem
The high
temperature
warning icon
is displayed and
recording is not
possible.
When recording
still pictures, the
angle of view of
the image
displayed on the
LCD monitor
changes.
The unit arbitrarily
stops recording.
Image not in focus
There is noise in
the recording
image.
Recording
Check points
≥ The battery temperature or unit internal
temperature (excluding battery) rises. Wait
for the temperature to drop before using the
unit again.
≥ The field of view of the image displayed on
the LCD monitor differs for motion picture
recording and still picture recording. At time
of purchase, the recording standby screen
shows video view. Press the
halfway to change to photo view. To change
the angle of view of the recording standby
screen to photo view, set [PHOTO VIEW] to
(ON). (l 107)
≥ Use an SD card that can be used for motion
picture recording. (l 39)
≥ The recordable time may have shortened
due to the deterioration of the data writing
speed or repeated recording and deletion.
Using the unit, format the SD card or built-in
memory. (l 72)
≥ Close and then re-open the LCD monitor.
Alternatively, turn the unit off and then on
again. When [FOCUS] is set to
(MANUAL), do the above, then reconfigure
the manual focus.
≥ When the [ISO] setting is too high, noise
may appear in the recorded images. Please
lower the ISO sensitivity setting. (l 100)
button
177
VQT4F46