Message Display - Panasonic DMC-FX90K Basic Owner's Manual

Message Display

Confirmation messages or error messages will be displayed on the screen in
some cases.
The major messages are described below as examples.
[Some pictures cannot be deleted]/[This picture cannot be deleted]
•
Pictures not based on the DCF standard cannot be deleted.
> If you want to delete some pictures, format the card after saving necessary
data on a PC etc.
[Not enough space on built-in memory]/[Not enough memory on the card]
•
There is no space left on the built-in memory or the card.
•
When you copy pictures from the built-in memory to the card (batch copy), the
pictures are copied until the capacity of the card becomes full.
[Memory card error.
This card cannot be used in this camera.
Format this card?]
•
It is a format that cannot be used with this unit.
> Insert a different card.
> Format the card again with the camera after saving necessary data on a PC
etc. Data will be deleted.
[Please turn camera off and then on again]/[System Error]
•
This message appears when the camera is not operating properly.
> Turn the camera off and on. If the message persists, contact the dealer or
your nearest Service Center.
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[This battery cannot be used]
•
Use a genuine Panasonic battery. If this message is displayed even when a
genuine Panasonic battery is used, contact the dealer or your nearest Service
Center.
•
If the battery terminal is dirty, clean it and remove any objects.
28
VQT3S29 (ENG)