Turning On The Projector - NEC P350W User Manual

 Turning on the Projector

1. Slide the lens cover to the left to uncover the lens.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will turn to blue and the projector
will become ready to use.
TIP:
• When the message "PROJECTOR IS LOCKED! ENTER YOUR
PASSWORD." is displayed, it means that the [SECURITY]
feature is turned on. (→ page 30)
• When the ECO message is displayed, it means that [ON] is
selected for [ECO MESSAGE]. (→ page 94)
• Pressing buttons such as power button and MENU button will
make sound. To turn off the beep sound, select [OFF] for [BEEP]
from the menu. (→ page 98)
After you turn on your projector, ensure that the computer
or video source is turned on and that the lens cover is
open.
NOTE: When no input signal is present, the no-signal guidance is
displayed (factory menu setting).
2. Projecting an Image (Basic Operation)
Standby
Steady orange light
(→ page 192)
14
Blinking Power On
Blinking blue light Steady blue light