Presets For Calibration And Profiling - NEC SpectraView Reference 241 User Manual

Profiler
User Manual
LCD-flat screen with ambient light hood and
Eye-One Pro spectrophotometer.

3.3 Presets for calibration and profiling

After the setup of the measurement device SpectraView Profiler is ready
to calibrate and profile your monitor automatically or semiautomatically.
But before you start the process, please check some essentials in order
to get the best quality out of your monitor.
Cleanliness of the screen
Please check if the screen is clean, free of dust, fingerprints etc. NEC
recommends to clean the monitor each time before profiling.
Reflections / stray light
Turn the monitor off and check if you can see any reflections of light
sources on the screen. If so, you need to change the monitor position
and/or to shield the monitor with an ambient light hood.
Ambient Light
The ambient light in your working environment should comply with the
relevant standards. For measuring the ambient light, please refer to
chapter 4.6.2 Ambient light.
Monitor warm up
The colors of a monitor are becoming stable after a certain time. For
this reason please turn on the monitor at least 30 to 60 minutes before
measuring. This allows the monitor to stabilize the color output.
22