NEC SpectraView Reference 241 User Manual page 21

Profiler
User Manual
basICColor basICColor
SQUID2 RAY
GretagMacbeth GretagMacbeth
EyeOne display EyeOne display LT
GretagMacbeth GretagMacbeth
EyeOne Monitor EyeOne pro
X-Rite basICColor basICColor
DTP 94 USB SQUID* SQUID
X-Rite Sequel
ColorMunki Chroma4
Icons for the supported measurement devices.
The following measurement devices are supported by the SpectraView
Profiler 4.1:
Colorvision
SPYDER2
GretagMacbeth
EyeOne display 2
Monaco
After selecting a measurement device an icon of the device will be
OPTIX
XR
displayed in the main window of SpectraView Profiler 4.1. You don't
* ab Version
4.1.1; Intel-Mac
have to select a measurement device when you start SpectraView
werden nicht
unterstützt
Profiler 4.1 the next time. The measurement device will be pre-selected.
Colorvision
You will only be asked to calibrate the measurement device before you
Spyder3
start the calibration and profiling process the next time.
Tip: Calibration of the Measurement Device
It is advisable to calibrate the measurement device directly before the
measurement. Otherwise the device could be readjusted when starting
the measurement and the result will not be adequate.
• basICColor SQUID/SQUID 2/SQUID2wg
• basICColor RAY
(Please select: X-Rite DTP 94 USB)
• Colorvision Spyder/Spyder 3
• Gretag Macbeth EyeOne display/EyeOne display 2
• Gretag Macbeth EyeOne Monitor/EyeOne pro
• NEC MDSV Sensor
(Please select: basICColor SQUID2)
• Monaco OPTIX
XR
• Sequel Chroma4
• X-Rite DTP 94 USB
• X-Rite ColorMunki
21