Ventilation Requirements; Touch Driver Installation - NEC V651-TM Installation Manual

V651-TM Installation Guide
65" LCD Display
Ventilation Requirements (all models):
Dimensions below are minimum required for proper ventilation.
NOTE:

The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be
covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and
recommendations.

Touch Driver installation:


In order for the touchscreen to properly work, the source computer needs to be connected to the
display via provided USB A to B cable. This connection on the screen is on the upper back right
side. See image to the right.

When plugging in the USB A to B cable from a Windows 7 or XP source computer to
V651-TOUCH, touch screen should react and act as a HID device,
automatically downloading all touch driver information.

USB plug-in is located on the upper portion of the left side of the display.

If using any other operating system, please refer to the instructions on the provided disk
www.necdisplay.com
NEC Display Solutions of America, Inc.
V651-TM
Rev 1.0
Page 2 of 8