NEC V651-TM Installation Manual

V651-TM Installation Guide
65" LCD Display
Contents:
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Touch Driver Installation
Display Dimensions
Front, Top, Right Side, Left Side, Back
Rear
Optional Table Top Stand Dimensions
Optional Speaker Dimensions
Input Panels
Control Codes
Crystal Touch Manager Software

Product Description:

Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:

This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.

Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.

4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).

Distances are in inches, for millimeters multiply by 25.4.

Distances may vary ±5%.

Tilt Angle and Rotation:


Below is the maximum angle the monitor can be tilted. Note that the monitor can only be tilted in the landscape position.
www.necdisplay.com
LCD Display
1920 x 1080
16:9
Class B
330 W (typ)
1126.0 BTU/hour
Max 20º Tilt (Landscape Only)
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 7
Page 8
Dimensions without stand: 60.6" (W) x 35.8" (H) x 5.2" (D)
Dimensions with stand:
Weight without stand:
Weight with stand:
Rev 1.0
60.6"(W) x 37.2"(H) x 17.5"(D)
165.4 lbs
172.2 lbs
V651-TM Page 1 of 8