LG LRG3021ST User Manual page 34

T RO U B L E S H O OT I N G
BEFORE CALLING FOR SERVICE
Problem
Broil or self-clean • The oven temperature is too high.
doesn't work
Oven not clean after a • Improper oven controls setting.
self-clean cycle
• The oven was heavily soiled.
"CLOSE DOOR TO • The broil or self-clean cycle has been
CONTINUE BROILING"
or "DOOR OPENED"
appears in the display
"DOOR LOCKED" light • The oven door is locked because the
is on when you want to
cook
Oven control beeps • Display shows F3.
and displays any F
code error.
• Display shows F11.
• If the function code repeats.
Oven racks are • The oven racks were cleaned in a self-
difficult to slide
Power outage, clock • Power outage or surge.
flashes
• This is normal in a new oven and will
"Burning" or "oily"
odor emitting from the
vent
Strong odor • An odor from the insulation around
34
Possible Causes
selected but the door is not closed.
temperature inside the oven has not
dropped below the locking
temperature.
clean cycle.
disappear in time.
the inside of the oven is normal for
the first few times the oven is used.
Solutions
• Allow the oven to cool below locking temperature.
• This can take up to 1 hr after the cycle is complete.
• See the Using the "USING THE SELF-CLEANING
OVEN" section.
• Clean up heavy spillovers before beginning the self-
clean cycle. Heavily soiled ovens may need to self-
clean again or for a longer period of time.
• Close the oven door.
• Touch the "CLEAR OFF" pad. Allow the oven to
cool.
• Touch the "CLEAR OFF" pad. Allow the oven to
cool for one hour. Put the oven back into operation.
• Check the main gas shut-off valve or the oven gas
shut-off valve(see "Surface burners light but oven
burner does not" column).
• Disconnect all power to the range for 5 minutes and
then reconnect power. If the function error code
repeats, call for service.
• Apply a small amount of vegetable oil to a paper
towel and wipe the edges of the oven racks with the
paper towel. Do not use lubricant sprays.
• Reset the clock. If the oven was in use, you must
reset it by touching the "CLEAR OFF" pad, setting
the clock and resetting any cooking function.
• To speed the process, set a self-clean cycle for a
minimum of 3 hours. See the "USING THE SELF-
CLEANING OVEN" section.
• This is temporary.