Dynex DX-ESATAP User Manual page 7

Installing the PCI Express adapter
3 Locate an available PCI Express slot.
PCI connectors
4 Remove the screw that secures the backplate, then remove
the backplate. If your computer case is tooless, refer to the
User Guide for instructions.
5 Carefully insert the adapter into the PCIe slot, seating it
firmly into the slot. Do not touch the PCIe bus contacts on
the adapter.
6 Secure the adapter to the case using either the screw you
removed from the backplate or the tooless equivalent
(depends on the case).
7 Connect an available 4-pin power plug from your computer
power supply to the PCI Express adapter's JP1 power
connector.
PCI Express
connector, X1
PCI Express
connector, X16
Backplate
7