Table of Contents
Advertisement
MSCDEX.EXE must be included in the AUTOEXEC.BAT tile. The MSCDEX.EXE will be invoked
each time the system boots up. The syntax is as follows:
C: \ <path> \MSCDEX.EXE / D:<device name. /L:<drive letter>/M:<buffersize>
Example:
C:DOS\MSCDEX.EXE /D:EPSON00l /M: 12
Path-filename
Device-name
Buffer Size
IL:
IV:
ATA/IDE Owner's Manual
MSCDEX.EXE INSTALLATION INSTRUCTIONS
The path where the MSCDEX.EXE tile is located.
The same name that was used with the DEVICE DRIVER in the CONFIG.SYS tile.
Specifies the number of sector buffers. The default is 12.
Specifies the drive letter to the first CD-ROM drive.
Directs MSCDEX to display memory statistics when it is loaded.
14
Advertisement
Table of Contents
