Epson C826051 (PS Card User Manual page 31

3. Type WIN3INST and press the ENTER key again. If your
Windows is not installed in the C:\ WINDOWS directory, type
WIN3INST drive:\path and press the ENTER key. Then the
following message appears:
Use this batch file to install the EPSON PS CARD screen fonts
and font metric files into your Windows 3.x System subdirectory
and WIN. INI file.
This batch file will perform the following operations:
1. Make a backup copy of WIN.INI named WIN_SAVE.INI.
2. Make a working copy of WIN.INI.
3. Run the font installer.
4. Update the WIN.INI file in your Windows directory.
You are expected to supply a path to your Windows subdirectory
on the command line. If you do not supply a path, this batch
file will use the default Windows directory of C:\WINDOWS and
C:\WINDOWS\SYSTEM.
If you have not supplied a path on the command line and you did
not install Windows using the default configuration, please type
Control-C now and restart this batch file.
Strike a key when ready...
4. Press any key to proceed with the installation. Note that if the
WIN.INI file does not exist in the directory c:\WINDOWS, the
display shows the above screen again. In this case, press Control-
C to quit the installation and restart from step 1 after confirming
the directory in which you installed Windows.
Installing Screen Fonts and Drivers
Windows
3-5