Epson C826051 (PS Card User Manual page 17

For EPL-7000/7100 users
1. Hold down the SelecType button for several seconds until you
enter SelecType Level 2. A SelecType Level 1 option is displayed
briefly before the printer enters the Level 2 main menu.
Press the Aor vbutton until the "CH CONFIG P,S" menu
2.
appears.
Press the bbutton to enter the option; one of the submenus
3.
(MODE, I/F, or RX-/BUFFER) appears.
4. Press theA or vbutton until the MODE submenu appears. If
this menu is displayed in step 3, ignore this step.
5. Press the bbutton to enter the option; one of the options and
the El icon appear.
6. Press the Aor vbutton until the "# PS" option appears.
7. Press the bbutton to set the PS option.
8. Press the SelecType button once to exit SelecType.
The PS mode remains in effect until you change the setting or turn
off the printer. If you want to make this setting permanent, use the
"P-CONFIG. SAVE" menu in SelecType Level 2. See your printer
manual.
Handing the PostScript CARD
Selecting PostScript
1-5