Epson PowerLite Home Cinema 3020 User Manual page 81

■
Press the function key that lets you display on an external monitor. It's often labeled with
an icon such as
the key while pressing it. Check your laptop's manual or online help.
Fn
On most systems, the
projector, or display on both at the same time. Allow a few seconds for the projector to
sync up after pressing it.
■
If the function key doesn't let you display simultaneously on both screens, you might
need to use the Display utility in the Windows Control Panel to make sure that both the
LCD screen and external monitor port are enabled. From the Windows Control Panel,
open the
Display
then click
Advanced
computer; you may need to click a
port is set as your primary display or enabled. See your computer manual or online help
for details.
If you're using Mac OS X:
1. Open the
System Preferences
2. Select the
VGA Display
3. Click the
Arrange
4. Check the
Mirror Displays
The picture is upside-down or reversed.
Change the
Projection
The picture isn't rectangular.
■
If the image looks like
screen and angled toward it. Face the projector straight ahead (instead of at the center of
the screen), then use the horizontal keystone slider to correct the image (see page 27).
■
If the image looks like
use the vertical keystone buttons to adjust the image (see page 27).
The picture contains static or noise.
■
Make sure the
Input Signal
page 58).
■
If you're viewing still images and you notice flickering or horizontal lines, turn on the
setting (see page 46).
Progressive
, but it may also be labeled
key lets you toggle between the LCD screen and the
utility. In the Display Properties dialog box, click the
. The method for adjusting the setting varies from computer to
Monitor
utility and select
or
Color LCD
or tab.
Arrangement
checkbox. (See your computer manual for details.)
setting in the Settings menu (see page 57).
or , the projector has been placed off to one side of the
or , make sure the projector is not tilted up or down, then
is set correctly for your connected video equipment (see
. You may have to hold down
CRT/LCD
tab, then make sure the external Monitor
.
Displays
option, if necessary.
tab,
Settings
Problem Solving
81