Epson XP-600 Quick Manual page 27

Connect the Printer to Your Wireless Network
If you are unable to connect to your wireless network using the product CD and the Start
Here sheet, you can use the touch panel on your product. Before you start, make sure you
know your network name (SSID) and password.
1. Press if necessary, press l or r to select
2. Select
Wi-Fi Setup Wizard
3. Press u or d until you see the name of your wireless network, select it, then press
Continue with step 6.
If you don't see your network name, select
, then press
Networks
4. Enter your network name (SSID).
■
If your network name has uppercase (ABC) or
lowercase (abc) letters, press
press to enter them correctly.
OK
■
Select
cursor.
■
Select
■
Select
■
Select
5. Select , then press
Done
6. If your network has security enabled, you see the
password screen:
7. Follow the instructions above to enter the password. If
your network password has uppercase or lowercase
letters, be sure to enter them correctly.
8. Select , then press
Done
entering your password.
When the printer is connected to your network, the WiFi light should be green, and not
flashing. Make sure you install the software on every computer from which you want to
print. When prompted during software setup, select
.
wireless network
, then press
. You see this screen:
OK
or , then press
OK
, then press to enter symbols.
OK
, then press to delete.
OK
, then press to enter a space.
OK
when you're finished entering your network name.
OK
when you're finished
OK
, then press
Wi-Fi Setup
.
OK
Other
or , then
to move the
The printer is already on my
.
OK
.
OK
Solving Problems
27