Copying Data From Usb Devices; Connecting A Usb Device - Epson P-3000 Multimedia Storage Viewer User Manual

P-3000 User's Guide

Copying Data from USB Devices

You can copy data from USB devices directly using the USB Standard-A connector of the
viewer. Only a USB device supporting the USB Mass Storage specification can be used.
You can use the following USB storage devices capable of copying: digital cameras,
external HDD drives, USB memories, and card reader/writers. You can also use the
following Epson Multimedia Storage Viewers: P-2000 and P-2500.

Connecting a USB device

1. Connect the AC adapter to the viewer if possible.
Note:
Some USB devices require the viewer to be powered via the AC adapter.
2. Connect the viewer and the USB device. Open the side upper cover and connect a USB
cable to the Host (Standard-A) connector and the other end to the USB device, or
connect a USB memory to the viewer.
3. Turn on the viewer and the USB device.
Note:
If the USB device has a supplied AC power cord, plug it in also, to prevent data loss while
transferring.
Using a USB hub is not supported.
A USB device without power may not be activated.
A USB device with the certification or encryption function cannot be used.
When you connect a USB device to this viewer, use the USB cable supplied with the device.
Do not connect USB interfaces (Host-standard A and Slave-Mini B) at the same time. It may
cause a malfunction.
Do not touch the Slave-Mini B connector during the USB data transfer.
23
Transferring Data