Chapter 3 Transferring Data; Setting And Removing Cf/Sd Memory Cards; Inserting A Cf Memory Card Into The Cf Card Slot - Epson P-3000 Multimedia Storage Viewer User Manual

P-3000 User's Guide
Chapter 3
Transferring Data
Transferring the data of a full memory card or other USB devices to the viewer makes it
possible for you to continue taking pictures.

Setting and Removing CF/SD Memory Cards

The viewer has a CF Card slot and an SD Card slot.
This section describes how to set memory cards to copy data onto the viewer.
Caution:
c
To use a memory card correctly, read the manuals provided with the memory card.
Never remove a memory card while the Access lamp is flashing. Doing so may cause
data in the card or HDD to be lost or damaged.
Do not put stickers on memory cards. The sticker may peel off, preventing the card from
being ejected and damaging the viewer.
Avoid using or storing the card in direct sunlight, or in places that are extremely hot,
humid, or dusty.
Supported types of memory cards
CF (CompactFlash) memory card (Type2 and 3.3 V, including Micro Drive)
SD memory card (up to 2 GB), SD High-Capacity card
MultiMedia Card (up to 1 GB), MultiMedia Card Plus
Note:
Commercially available adapters will be required to use other memory cards (miniSD, RS-MMC,
Memory Stick Duo, Memory Stick PRO Duo, xD-Picture Card, and so on). Contact our customer
support for details.

Inserting a CF memory card into the CF Card slot

You can insert a CF memory card (or other cards with the CF adapter) into the CF Card
slot.
18
Transferring Data