Electrolux ERW3313AOX User Manual page 14

14 www.electrolux.com
WARNING!
This appliance must be earthed.
The manufacturer declines any lia-
bility should these safety measures
not be observed.
A
E
The wires in the mains lead are col-
oured in accordance with the fol-
lowing code:
A Green and Yellow:
C Brown:
E Blue:
6.3 Ventilation requirements
5 cm
6.4 Installing the appliance
CAUTION!
Make sure that the mains cable
can move freely.
B
C
D
Earth
Live
Neutral
min.
200 cm
2
min.
200 cm
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either
with the letter "E" or by the earth sym-
bol
2. Connect the wire coloured blue to the
terminal either marked with the letter
"N" or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
"L" or coloured red.
4.
Check that no cut, or stray strands of
wire is present and the cord clamp D is
secure over the outer sheath.
5. Make sure the electricity supply voltage
is the same as that indicated on the
appliance rating plate.
6. Switch on the appliance.
The appliance is supplied with a 13 amp
plug fitted B. In the event of having to
change the fuse in the plug supplied, a 13
amp ASTA approved (BS 1362) fuse must
be used.
WARNING!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard. Ensure that it is
disposed of safely.
The airflow behind the appliance must be
sufficient.
2
Do the following steps:
or coloured green and yellow.