Related Manuals for Electrolux EGT6242NOK
Summary of Contents for Electrolux EGT6242NOK
- Page 1 ..................... EGT6242 EN HOB USER MANUAL...
-
Page 2: Table Of Contents
9. ENVIRONMENT CONCERNS ..........14 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. -
Page 3: Safety Information
ENGLISH SAFETY INFORMATION This appliance is suitable for the following • Always be careful when you move the appliance because it is heavy. Always markets: wear safety gloves. Before the installation and use of the ap- pliance, carefully read the supplied in- •... -
Page 4: Gas Connection
• Fats and oil when heated can release poles. The isolation device must have a flammable vapours. Keep flames or contact opening width of minimum 3 heated objects away from fats and oils when you cook with them. -
Page 5: Product Description
ENGLISH 1.4 Care and Cleaning 1.5 Disposal WARNING! WARNING! Risk of damage to the appliance. Risk of injury or suffocation. • Clean regularly the appliance to prevent • Contact your municipal authority for in- the deterioration of the surface material. formation on how to discard the appli- ance correctly. -
Page 6: Helpful Hints And Tips
Ignition candle 3.1 Ignition of the burner Thermocouple WARNING! WARNING! Be very careful when you use Do not keep the control knob open fire in kitchen environment. pushed for more than 15 sec- Manufacturer decline any respon- onds. sibility in case misuse of the flame... -
Page 7: Care And Cleaning
ENGLISH Do not place unstable or deformed pots Burner Diameters of cook- on the rings to prevent from spill and in- ware jury. Rear Semi- 120 - 220 mm WARNING! rapid Liquids spilt during cooking can cause the glass to break Auxiliary 80 - 180 mm WARNING! -
Page 8: Troubleshooting
After cleaning, dry the appliance with a WARNING! soft cloth. Do not slide cookware over the glass because it could scratch the Removing the dirt: surface. Also, do not let hard or – Remove immediately: melting sharp objects fall onto the glass or plastic, plastic foil, and food con- hit the edge of the hob. -
Page 9: Installation
ENGLISH If you operated the appliance in- • Product number (PNC) ....correctly, or the installation was • Serial Number (S.N.) ....not carried out by a registered en- Use the original spare parts only. They are gineer, the visit from the customer available at Service Force Centre and ap- service technician or dealer may proved spare parts shops. -
Page 10: Provision For Ventilation
10 www.electrolux.com the other safety instructions incorporated Provision for ventilation in this instruction booklet be ignored. Detailed recommendations are contained On the end of the shaft, which includes in the following British Standards Codes the G 1/2" threaded elbow, adjustment is Of Practice: B.S. -
Page 11: Electrical Connection
ENGLISH 7.3 Injectors replacement 7.5 Electrical connection Remove the pan supports. • The electrical work necessary to install the appliance must be done by a quali- Remove the caps and crowns of the fied electrician or competent person, burner. according to the current regulations. With a socket spanner 7 remove the •... - Page 12 12 www.electrolux.com The rating plate is located on the bottom WARNING! of the appliance. Make sure that the cut off plug is The appliance is supplied with a 3 core disposed of safely. A cut off plug flexible supply cord with a 3 amp plug. If it...
-
Page 13: Technical Information
ENGLISH Kitchen unit with oven The hob recess dimensions must obey the indication and the kitchen unit must be equipped with vents to let a continu- ous supply of air. The electrical connec- tion of the hob and the oven must be in- stalled separately for safety reasons and to let easy remove oven from the unit. -
Page 14: Environment Concerns
14 www.electrolux.com TOTAL POWER: G20 (2H) 20 mbar Gas connection: G 1/2" = 7.7 kW Gas supply: G20 (2H) 20 mbar G30 (3+) 28-30 Appliance class: mbar = 545 g/h G31 (3+) 37 mbar = 536 g/h By-pass diameters Electric supply:... - Page 15 ENGLISH...
- Page 16 www.electrolux.com/shop...