Adjustment - Canon LV-8235 UST Assembly And Installation Manual

■ Installation Procedure
q
Adjust the forward/backward slide
(Adjustable range: 0 - 180 mm)
¡ Loosen the four bolts on the top of the adjustment
unit using a hexagon wrench (3 mm) and adjust the
slider of the adjustment unit. After the adjustment,
tighten the four bolts which were loosened.
w Adjust the vertical slide (Adjustable range: +4° - –2°)
¡ Remove the left and right cover plates of the wall plate.
¡ Loosen the four bolts A located inside the setting plate using a hexagon wrench (6 mm).
¡ Adjust the vertical slide with the two bolts B located inside the setting plate using a hexagon wrench (6 mm)
(Adjust the left and right bolts so that their ends touch equally against the wall plate.)
¡ Tighten the four bolts A which were loosened using the hexagon wrench (6 mm).
¡ After adjustment, attach the left and right cover plates again.
4°
2°
e
Adjust the horizontal rotation (Adjustable range: +5° - –5°)
¡ Loosen the two bolts A located on the top of the adjustment unit using a hexagon wrench (3 mm) so that
adjustment can be carried out.
¡ Turn the adjustment knob B located on the left side of the adjustment unit to adjust the horizontal rotation.
¡ Tighten the two bolts A which were loosened using the hexagon wrench (3 mm).
Adjustment knob B
* "A" marks appear on the setting plate to indicate the locations of the bolts and adjustment knob.
7

Adjustment

Bolts A
5°
Bolts x 4
0 - 7.09 inches
(0 - 180 mm)
Bolts A
Bolts B
5°