Asus Maximus V GENE User Manual page 93

DIGI+ Power Control
Do not remove the thermal module while changing the DIGI+ Power Control
related parameters . The thermal conditions should be monitored.
Some of the following items are adjusted by typing the desired values using
the numeric keypad and press the <Enter> key. You can also use the <+> and
<-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
CPU Load-Line Calibration [Auto]
CPU Load-line is defined by Intel VRM spec and affects CPU voltage. The
CPU working voltage will decrease proportionally to CPU loading. Higher
load-line calibration would get higher voltage and better overclocking
performance, but increase the CPU and VRM thermal. This item allows
you to adjust the voltage range from the following percentages to boost the
system performance: 0% (Regular), 25% (Medium), 50% (High), 75% (Ultra
High) and 100% (Extreme).
Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specification.
CPU Voltage Frequency [Auto]
Switching frequency will affect the transient response and component
thermal. Higher frequency gets quicker transient response.
Configuration options: [Auto] [Manual]
CPU Fixed Frequency [XXX]
The values range from 300kHz to 500kHz with a 10kHz interval.
CPU Power Phase Control [Auto]
Phase number is the number of working VRM phase. Increasing phase
number under heavy system loading to get more transient and better thermal
performance. Reducing phase number under light system loading to increase
VRM efficiency
[Auto]
[Standard]
[Optimized]
[Extreme]
[Manual Adjustment]
CPU Power Duty Control [T.Probe]
[T.Probe] Maintains the VRM thermal balance.
[Extreme] Maintains the VRM current balance.
ROG MAXIMUS V GENE
The default power control phase mode
Proceeds phase control depending on the CPU loading.
Loads the ASUS optimized phase tuning profile.
Proceeds the full phase mode.
Allows manual adjustment.
3-13