Asus Maximus V GENE User Manual page 118

Bootup NumLock State [On]
[On]
[Off]
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Wait for 'F1' If Error [Enabled]
When set to [Enabled], the system waits for the <F1> key to be pressed when error
occurs.
Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current] The third-party ROM messages will be displayed only if the third-
Setup Mode [Advanced Mode]
[Advanced Mode]
[EZ Mode]
UEFI/Legacy Boot [Enable both UEFI and Legacy]
[Enable both UEFI and Legacy]
[Disable UEFI]
[Disable Legacy]
PCI ROM Priority [Legacy ROM]
[Legacy ROM]
[EFI Compatibe ROM]
3-38
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
Enables the full screen logo display feature.
Disables the full screen logo display feature.
The third-party ROM messages will be forced to display during the
boot sequence.
party manufacturer had set the add-on device to do so.
Sets Advanced Mode as the default screen for entering the
BIOS setup program.
Sets EZ Mode as the default screen for entering the BIOS setup
program.
Enables both UEFI and Legacy boot.
Enables the Legacy boot, and disables the
UEFI boot.
Enables the UEFI booth, and disables the
Legacy boot.
Launch Legacy ROM
Launch UEFI Compatible ROM
Chapter 3: BIOS setup