Connecting A Computer; Connecting An Audio Amplifier; Connecting A Digital Sound System; Connecting Headphones - Dynex DX-L37-10A User Manual

Making connections
3 Connect the other end of the component video cable to the
COMPONENT1 or COMPONENT2 jacks on the back of your TV.
4 Connect an audio cable to the AUDIO OUT jacks (L/R) on the
component device.
5 Connect the other end of the audio cable to the
COMPONENT AUDIO-R and AUDIO-L jacks on the back of
your TV.
To play from a component device:
1 Turn on your TV, then press INPUT on the remote or on the side of
the TV. The INPUT SOURCE menu opens.
2 Press or to select Component1 or Component2, then
press ENTER.
Note: You can also press COMP once for Component1 or twice for
Component2.
3 Turn on the component video device and set it to the correct
output mode. See the component video device's user guide for
more information.

Connecting a computer

To connect a computer:
1 Make sure that your TV's power cord is unplugged and the
computer is turned off.
2 Connect a VGA cable to the VGA jack on the computer, then
connect the other end of the cable to the VGA PIC jack on the
back of your TV.
Note: The VGA cable should be a 15-pin D-Sub (analog RGB) cable.
3 Connect an audio cable to the AUDIO OUT jack on the computer,
then connect the other end of the cable to the VGA AUDIO jack
on the back of your TV.
Note: The audio cable should have a stereo mini plug.
To play video from a computer:
1 Turn on your TV, then press INPUT on the remote or on the side of
the TV. The INPUT SOURCE menu opens.
2 Press or to select VGA, then press ENTER.
3 Turn on the computer, then adjust the display properties, if
necessary.

Connecting an audio amplifier

To connect an audio amplifier:
1 Make sure that your TV's power cord is unplugged and the
amplifier is turned off.
Back of TV
Computer
D-Sub cable (analog RGB)
Audio cable (stereo mini plugs)
2 Connect an audio cable to the AUDIO OUT jacks (L/R) on your TV.
Note: Cables are often color-coded to connectors.
Connect yellow to yellow, red to red, and white to white.
Back of TV
3 Connect the other end of the cable to the audio input jacks (L/R)
on your amplifier.
To play the TV sound through an audio amplifier:
1 Turn on your TV and select a program to watch.
2 Turn on your amplifier, select the TV sound source, then adjust
the volume to a comfortable level.

Connecting a digital sound system

To connect a digital sound system:
1 Make sure that your TV's power cord is unplugged and the digital
sound system is turned off.
2 Connect a digital optical audio cable to the S/PDIF IN jack on the
digital sound system.
SERVICE PORT DIGITAL OUTPUT
Optical audio cable
3 Connect the other end of the cable to the DIGITAL OUTPUT jack
on the back of your TV.
Note: The DIGITAL OUTPUT jack works with digital TV channels only.

Connecting headphones

To connect headphones:
• Connect the headphones to the headphone jack on the side of
your TV.
Note: Loud noise can damage your hearing. When using headphones, use
the lowest volume setting that still lets you hear the sound.
Amplifier
AUDIO IN
AV cable
Digital sound system
Back of TV
S/PDIF jack
Side of TV
9