Asus RS920A-E6/RS8 User Manual page 87

SouthBridge Configuration
Advanced
SouthBridge Chipset Configuration
SP5100 CIMx Version : 6.6.0
SB Debug Configuration
OHCI HC (Bus 0 Dev 18 Fn 0)
OHCI HC (Bus 0 Dev 18 Fn 1)
EHCI HC (Bus 0 Dev 18 Fn 2)
OHCI HC (Bus 0 Dev 19 Fn 0)
OHCI HC (Bus 0 Dev 19 Fn 1)
EHCI HC (Bus 0 Dev 19 Fn 2)
OHCI HC (Bus 0 Dev 20 Fn 5)
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
SB Debug Configuration
Advanced
A15 ECOs
Dis #THRMTRIP Before KBRst
SATA-IDE Ports Auto Clk Ctrl
SATA-AHCI Ports Auto Clk Ctrl
SATA PORT0 MODE
SATA PORT1 MODE
SATA PORT2 MODE
SATA PORT3 MODE
SATA PORT4 MODE
SATA PORT5 MODE
HPET MSI
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
A15 ECOs [Disable]
Configuration options: [Disable] [Enabled]
Dis #THRMTRIP Before KBRst [Enabled]
Configuration options: [Enabled] [Disabled]
SATA-IDE Ports Auto Clk Ctrl [Disable]
When set to [Enabled], the system will turn off the clocks for the unused SATA
ports in IDE modes. Doing so will enable some power savings.
Configuration options: [Disable] [Enabled]
The hot-plug function will be disabled when turning off the clock for the SATA
port.
ASUS RS920A-E6/RS8; RS924-E6/RS8
BIOS SETUP UTILITY
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
SouthBridge Debug Configuration
[Disable]
[Enabled]
[Disable]
[Disable]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
Options for SB
Debug Features
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Options
Disable
Enabled
Select Screen
←→
Select Item
↑↓
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
5-19