Asus Xonar U3 User Manual page 24

8.3.2 Recording/Monitoring Volume
6
5
4
3
No Item
1 Recording Volume Tab
2 Source / path name
3 Monitoring button
4 Recording Selector
button
5 Recording Volume
Slider
6 Left/Right balance
7 Reset
18
1
2
Description
Click this button to show the recording volume page.
This shows the source name for each volume control slider,
including:
MIC: recording from MIC jack
Line-In: recording from Line-in jack for external audio devices
WAVE: recording from digital wave audio you are playing on
PC
Click this button to monitor and loopback recording audio to
outputs (PC speakers). Therefore, the recording volume will
influence the monitoring signals from speaker outputs. The
audio will be mixed into the streams you are playing out from
your PC and all DGP effects will be applied to the source,
too.
Click this button to select the path/source you are going to
record. Please note that the recording function on Windows
is a one-path selector. So, you can select only one default
recording source at a time. You may have to restart the
recorder program if you switch to a different source. (Note:
On Vista, some application programs may allow you to
select the recording device/path in the recording programs
themselves.)
Drag this slider down to decrease the recording volume; drag
up to increase the recording volume. The tool-tip reveals the
percentage number from 1 to 100 in terms of the full scale
level.
This horizontal slider controls the volume between the left
and right channels.
Click to reset all volume controls to the default settings.
ASUS Xonar U3
7