Apm - Asus Crosshair V Formula-Z User Manual

SB HD Azalia Configuration
Options for SB HD Azalia.
HD Audio Azalia Device [Enabled]
Allows you to enable or disable the HD Audio controller.
Configuration options: [Disabled] [Enabled]
Azalia Front Panel [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or
high-definition audio depending on the audio standard that the front panel audio
module supports.
[AC 97]
[HD]
SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
3.5.8

APM

ErP Ready [Disabled]
[Disabled]
[Enabled]
Restore AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
3-26
Sets the front panel audio connector (AAFP) mode to legacy AC'97
Sets the front panel audio connector (AAFP) mode to high definition
audio.
Sets to [SPDIF] for SPDIF audio output.
Sets to [HDMI] for HDMI audio output.
Disables the Energy Related Products (ErP) Ready function.
Allows BIOS to switch off some power at S5 state to get system ready for
the ErP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
Chapter 3: BIOS setup