Tumble dryer Save these instructions for future reference Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and ful ll your needs for many years to come. Scandinavian design combines clean lines, everyday functionality, and high quality.
Disposal Technical data Child safety Service and guarantee General Warranty Description of the tumble dryer How to contact ASKO Appliances Inc. Front panel Installation instructions Advice and tips before you tumble dry Positioning the tumble dryer Have the clothes been spun?
Before using your machine for the first time Do you need this Use&Care Guide in spanish? Log onto www.askousa.com/customer-care to download. ¿Necesita esta Instrucciones de uso y cuidado en español? Entre en www.askousa.com/customer-care y descárguesela. Do not tumble dry Certain materials are not suitable for tumble drying.
Installation accumulation of lint, dust and dirt. See the "Installation instructions" chapter. • The interior of the machine should be cleaned periodically by an authorized ASKO service WARNING! agent. • Do not place items exposed to cooking oils in WARNING - To reduce the risk of fire, electric your dryer.
Important safety instructions B) Grounding instructions for a Grounding instructions permanently connected appliance: A) Grounding instructions for a grounded, This appliance must be connected to a grounded cord-connected appliance metal, permanent wiring system, or an In the event of malfunction or breakdown, equipment-grounding conductor must be run with grounding will reduce the risk of electric shock by the circuit conductors and connected to the...
Child safety General WARNING! Do not allow children to play with the tumble dryer. The tumble dryer does not start automatically when the door is closed (if a child pulls the door shut from the inside, for example). Customer Care Center 1-800-898-1879 www.askousa.com...
Description of the tumble dryer Main power switch Outer door Panel Fan (behind hatch) Serial number tag and rating plate Lint filter Lint filter holder Customer Care Center 1-800-898-1879 www.askousa.com...
Advice and tips before you tumble dry Here are some tips that may help you before you Materials that should not be tumble begin tumble drying. dried Have the clothes been spun? This symbol means that the material is not Items to be tumble dried should be spun at 1000 suitable for tumble drying.
Operating instructions Auto Iron Dry WARNING! This program shuts off the heat once the load is To reduce the risk of electric shock or injury to just damp enough for ironing or pressing. persons, read the "Important Safety Instructions" Timed Dry section before operating this appliance.
Page 11
Operating instructions Program chart Here we present a few examples of the energy and time consumption of a few different program settings. Consumption can vary due to room temperature, humidity, load, variations in the power supply, and selected options For the consumption values given below, the requirements are as follows: Temperature of intake air: 73 °F (23 °C) Moisture content of intake air:...
Operating instructions Selecting Options First select which program you want to use and then select Delayed Start by pressing the button By selecting options, you can tailor a drying next to the symbol. The display shows Delayed program to suit your requirements. The Start in whole hours.
Operating instructions Press the Start button NOTE! Remaining drying time • Clean the lint filter after each load. See the "Care and cleaning" chapter. An estimate of the remaining drying time will be shown on the display a few minutes after the drying program starts.
Care and maintenance instructions Cleaning the lint filter Cleaning the outside of the machine The lint filter must be cleaned after each load. If Clean the outside of the machine and the program you have very hard water, this can cause panel with a mild cleaner.
Troubleshooting The machine will not start Overheating cut-off Check The overheating cut-off shuts off the tumble dryer • that the door is properly closed. if the temperature is too high, caused by lint • that the main power switch is on. clogging the lint filter, for instance.
Technical information Technical data Height: 33 1/2'' (850 mm) Width: 23 1/2'' (597 mm) Depth: 23 7/8" (606mm) Weight: 104 lb (47 kg) Cylinder volume: 29,3 gal (111 l) Max. drying capacity: 13 lb (6 kg) Speed: 52 rpm Rated power: See serial number tag and rating plate.
For residential installations only ASKO Appliances Inc. will pay for: Length of warranty Two-Year Full ASKO replacement parts and/or repair labor to correct defect in materials or workmanship. Service must be From date of purchase. provided by an authorized ASKO service agent.
Service and guarantee Warranty How to contact ASKO Appliances Inc. ASKO Appliances Inc. will not pay for: Write to us at: Service calls to: 1. Correct the installation of the appliance. ASKO Appliances Inc. 2. Repair damage due to shipment, delivery, P.O.
Installation instructions Stacking WARNING! The tumble dryer can be placed on top of a ASKO washing machine. To stack the dryer, you need WARNING - Risk of fire. the stacking attachments (foot cups and anti-tilt brackets) supplied with the machine. You will find...
Page 20
Installation instructions Built-in Install in a closet ASKO's front panel controls make it possible to install the washers and dryers in a closet. Make sure there is a ½” (12mm) minimum clearance between units and cabinet or wall. To ensure proper ventilation, we recommend louvered doors, particularly for condenser dryers.
Installation instructions 2. Remove the two screws indicated on the back 6. Push out the knock-out hole on the back of the of the washing machine. dryer (you don't have to completely remove the knockout, just fold it up far enough for the stacking bracket to fit inside the slot) using a hammer and screwdriver.
It should snap into place. outlet. 3. After you push the dryer into place, check for kinks in the duct. Asko dryers have a "T-style" Excessive duct length and too many bends can Asko dryers have a exhaust vent that allows you to “T-stile”...
Page 23
Installation instructions Connecting to a ventilation duct To connect the exhaust duct to a ventilation outlet, follow the steps below: You will need a UL-CSA-approved, 4-inch ridged 1. Connect the exhaust duct to a ventilation metal exhaust duct. If a flexible duct is used, it exhaust fitting or to a discharge through the must comply with the Outline for Clothes Dryer wall.
3-wire connection system. The dryer frame is washing machine or an equivalent. grounded by a link to the neutral conductor on the ASKO washers rated 208–240 V have two dryer terminal block. If local codes do not permit internal fuses of 15 A each.
Page 25
Installation instructions Connecting a 3-wire Power Cord 5. Connect ground (center) wire of power supply cord to the center, silver-colored terminal screw. Tighten screw. WARNING! 6. Connect the other wires to outer screws. 7. Tighten the strain relief screws. Before starting this procedure, be sure the power 8.
Page 26
Installation instructions 5. Remove ground wire (green with yellow stripes) from external ground connector screw and remove from center terminal block. 6. Connect ground (green) wire of cord to external ground conductor screw. 7. Connect neutral (white) wire of cord under center screw of terminal block.
Reversing the door Hinge pins (top and bottom) Lock hook Cover washer Hinges (left + right side) Plastic plugs (on the upper Toe kick and lower edges) Customer Care Center 1-800-898-1879 www.askousa.com...
Reversing the door You can choose whether the door is hung on the right or the left. Follow these instructions: 1. Remove the Toe kick. 2. Remove the hinge (two screws). 3. Lift the door up and remove it. Support the door while doing this.
Page 29
Notes Customer Care Center 1-800-898-1879 www.askousa.com...
Page 30
Notes Customer Care Center 1-800-898-1879 www.askousa.com...
Page 31
Notes Customer Care Center 1-800-898-1879 www.askousa.com...
Quick guide Fabrics Press the Start button • Dry fabrics of the same type together to ensure they dry as evenly as possible. Turn on the main power switch Drying program finished • "End" appears on the display when the program is finished.