Table of Contents
Advertisement
Connecting a computer monitor
Your computer can display images on the computer screen (LCD), an external monitor or display, or both the LCD and the
external device.
If you purchased a port replicator, you can connect your computer to a flat-panel display. See
Display
for more information.
To connect a computer monitor
1.
Make sure the computer monitor is plugged into an AC outlet.
2.
Plug the display cable into the Monitor (VGA) port
3.
If it is not already on, turn on the computer monitor.
4.
Press the Fn+F7 keys to toggle the display between your computer, the monitor, or both the computer and
monitor. See
Selecting a display
You cannot use the Monitor (VGA) port on your computer when a port replicator is connected to the computer. Use the
Monitor (VGA) port on the port replicator instead.
Connecting a Com puter Monitor
on the computer.
for more information.
Connecting a Flat-Panel
Page 107
Advertisement
Table of Contents
