Brother HL-1070 - B/W Laser Printer Service Manual page 139

Action 4-2: Connect Your Printer to Your Computers using the USB
interface ( Only for HL-1070 with Windows 98 )
The Universal Serial Bus is an interface which allows the printer to be connected to multiple
peripheral devices. If your PC has a USB port, you can connect the printer to your PC by
using the USB interface as described in the following procedure.
NOTE
We recommend that you use the USB interface with this printer on Microsoft Windows
98. Althrough Microsoft Windows 95 OSR2.1 supports the USB interface, some PCs do
not work correctly with the USB interface.
Only one Brother printer can be used in the same chain of the USB connection. If more
than one Brother printer exists in the same chain of the USB connection, only one printer
can be used.
To obtain the latest driver, refer to the following page on our web site:
http://www.brother.com/
1
2
3
[Software]
Turn the printer power off.
Connect your PC and HL-1070 with the
USB interface cable.
Turn the printer power on.
The dialog shown above will appear on
your PC.
Click the Next button.
Select "Search for the best driver for your
device."
Click the Next button.
- 9 -