System Requirements In The Brother Printing Solution For Windows; Features - Brother HL-1070 - B/W Laser Printer Service Manual

System Requirements in the Brother Printing Solution for
Windows
Check the following system requirements to setup and operate the printer
in the Brother Printing Solution for Windows environment:


IBM PC or compatible with 80486 SX or higher microprocessor


Parallel interface (or printer port)


4 MB or more of memory (8 MB recommended)


10 MB of space available on your hard disk for the printer driver and all
fonts


Microsoft Windows 95/98 , Windows NT 4.0 or Windows 3.1/3.11

Features

This printer has the following features:
Up to 1200 (H) x 600 (V) dpi Resolution and 10 ppm Printing
Speed
True 600 dots per inch (dpi) with microfine toner and ten pages per
minute (ppm) printing speed (A4 or Letter paper). This printer also
supports 1200 (H) x 600(V) dots per inch (dpi) resolution for
Windows DIB (Device Independent Bitmap) graphics. (It is
recommended to add memory when printing in 1200 x 600 dpi mode.)
Versatile Paper Handling
The printer has two multi-purpose sheet feeders and a straight paper
path mechanism.
From the front Feeder 1 you can load A4, letter, legal, B5, A5, A6 and
executive sizes of paper, and various types of paper including
envelopes, postcards, organizer paper, and your custom paper size.
From the rear Feeder 2 you can load A4, letter, legal, B5, and
executive sizes of paper. The front Feeder 1 also allows manual paper
loading, so you can also use labels and transparencies.
Enhanced Printing Performance and User-Friendly Operation for
Windows
The dedicated printer driver and TrueType-compatible fonts for
Microsoft Windows 95/98 and Windows 3.1 are available on the
floppy disk supplied with your printer. You can easily install them
into your Windows system using our installer program. The driver
supports our unique compression mode to enhance printing speed in
Windows applications and allows you to choose various printer
settings including toner saving mode, custom paper size, sleep mode,
gray scale adjustment, resolution and so forth. You can easily set
these print options through the Printer Setup Menu within the
Windows Control Panel.
1–3
CHAPTER 1 INTRODUCTION