Base Plate Assy - Brother HL-1070 - B/W Laser Printer Service Manual

3.11

Base Plate ASSY

Note: Prior to turning the printer upside-down, ensure that the drum unit has been
removed from the printer.
(1) Turn the printer upside down.
(2) Remove the five M4 and four M3 self tapping screws and one screw.
Taptite, bind M4x2
Taptite, cup M3x2
Base Plate ASSY
(3) Lift the base plate ASSY and remove the grounding screw.
Taptite, cup M3x2
Fig. 3.24
Fig. 3.25
III-15
Taptite, cup M3x2
Screw
Soundproof Sponge
Base Plate ASSY
Ground wire
Screw
Low-voltage Power
Supply PCB ASSY