Replacing the Hard Drive
1 Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE:
excessive force, you may damage the connector.
2 Slide the hard drive into the bay until it is fully seated.
3 Replace and tighten the screws.
4 Install the operating system for your computer, as needed (see "Restoring
Your Operating System" on page 144).
5 Install the drivers and utilities for your computer, as needed (see
"Reinstalling Drivers and Utilities" on page 140).
Returning a Hard Drive to Dell
Return your old hard drive to Dell in its original, or comparable, foam
packaging. Otherwise, the hard drive may be damaged in transit.
158
Adding and Replacing Parts
Use firm and even pressure to slide the drive into place. If you use
1
1
foam packaging
2
2
hard drive