Brother 206627 User Manual page 46

Clean:
Clicking on this button places the printer in "Cleaning Mode". Refer to that
maintenance procedure in this manual for further instructions.
Factory Reset:
Clicking on this button will return the printer to its original factory settings for
fonts and configuration. The configuration data from the file "PJ3Factory.cfg" or
"PJ3PlusFactory.cfg" on the same directory as exe file will be loaded and displayed.
Since that file is expected to match the internal factory configuration of your printer,
this file's properties are set to "Read Only" and it should not be modified.
Save Config:
Clicking on this button will save the configuration as you see it to the file "PJ3Default.
cfg" or "PJ3PlusDefault.cfg" on the same directory as exe file and then send this
configuration information to the printer. Be sure that all of the settings are adjusted
to your liking. Once sent to the printer, these settings will become the power-on
default settings but they can be changed subsequently as necessary..
Close:
This selection closes this application without sending data to the printer and without
saving the current settings.
Page 35