Collating Multiple Copies; Pausing Between Labels; Advancing The Label; Adjusting Print Contrast - Dymo Rhino 5200 Industrial Label Printer User Manual

Collating Multiple Copies

When printing multiple copies of a label file
containing more than one label, all the copies
of a label are printed before the next label
starts printing. You can choose to have the
label file print collated, so each complete copy
of the file prints before the second copy starts.
The following example shows three copies of a
label file containing three labels printed
normally and collated.
Normal
A101 A101 A101 A102 A102 A102 A103 A103 A103
Collated
A101 A102 A103 A101 A102 A103 A101 A102 A103
To collate multiple copies
1. Press .
2. Select Collate copies and press
3. Select On.
4. Press and then select Done (OK).

Pausing Between Labels

By default the printer pauses after printing each
label so you can cut the label. You can turn this
feature off to have the labels print continuously.
To set the printer to print continuously
1. Press .
2. Select Pause to cut btw labels and
press .
3. Select Off.
4. Press and then select Done (OK).

Advancing the Label

The default leader space for all labels is
approximately 10 mm. To add additional blank
space to the beginning or end of your label, you
can feed the label in 10 mm increments.
To advance the label
S H F I T
1. Press + .
2. Press to advance the label.

Adjusting Print Contrast

Depending on the label material you choose,
you may need to lighten or darken the print on
the label.
To adjust the print contrast
1. Press
2. Select Print contrast and press
3. Use the arrow keys to adjust the print contrast.
4. Press
5. Repeat as necessary until you are satisfied with
the print quality.

Using Printer Memory

The printer has a powerful memory feature that can
store label files for later recall. The number of label
.
files that can be stored is dependent on the size of
the label files.

Saving a Label File

When you save a label file, all the label text and
formatting are saved. A label file name can be up to
20 alphanumeric characters in length.
To save a label file
1. Create the labels in your label file.
2. Press
3. Select New and press
4. Enter a name for your label file and
press
5. Press

Recalling a Label File from Memory

Once a label is saved to memory, you can recall the
label to print or edit. Recalling a label replaces the
current label.
To recall a label from memory
1. Press
The memory locations are displayed.
2. Select the memory location that contains the
label you want and press
A message appears confirming that you want to
clear the current label text and formatting.
3. Press
17
.
and then select Done (OK).
.
.
.
to start a new label.
.
.
.
.