Epson TM-U375 User Manual page 63

Notes:
1. When printing on a single cut sheet that is narrower than the
carriage movement range, once the printer has been put in the
cut sheet mode and the sheet of paper has been inserted, the
following operations should be avoided: turning the power
supply switch on or off, opening the cover, issuing the return
home command (ESC <), or sending a reset command through
the interface.
When the carriage moves away from the home position, it may
come in contact with the left end
jam.
2. The cut sheet waiting state can be canceled by the DLE ENQ 3
command.
3. Use the ASB function to correctl y determine the paper state. See
Example Print Control
the paper, causing a paper
of
Cut Sheet later in this section.
for
Reference Information 4-9