Note:
There are two ways to replace the ribbon cassette. One is to turn the
printer off and on again before installing or removing the ribbon
cassette, making sure that data sent from the computer is not lost.
(When you turn off the printer power, data sent from the computer
is lost.) The other is to open the printer cover and press the
RELEASE
Both ways cause the print head to move to the center of the printer
and the paper clamp to release.
ribbon might not be inserted or removed correctly.
Removing the ribbon cassette
1. Turn the printer power off and on again; then open the printer cover.
2. Grasp the ribbon cassette's tab on the left side, lift the left side out first,
and then pull the cassette out of the printer, as shown in the illustration below.
Tab-
button before installing or removing the ribbon cassette.
If
one of these ways is not used, the
Using the Printer
2-7