The Advanced Mcacc Menu; Making Receiver Settings From The Advanced; Mcacc Menu - Pioneer VSX 1019AH-K - AV Receiver - Gloss Operating Instructions Manual

The Advanced MCACC menu

Chapter 10:
The Advanced MCACC menu
Making receiver settings from
the Advanced MCACC menu
The Advanced MCACC (Multi Channel
ACoustic Calibration) system was developed in
Pioneer's laboratories with the aim of making it
possible for home users to perform
adjustments of the same level as in a studio
easily and with high precision. The acoustic
characteristics of the listening environment
are measured and the frequency response is
calibrated accordingly to allow high precision,
automatic analysis and optimal calibration of
the sound field to bring it closer to a studio
environment than ever before. Furthermore,
while it was previously difficult to eliminate
standing waves, this receiver is equipped with
a standing wave control function using a
unique process to perform acoustic analysis
and reduce their influence.
This section describes how to calibrate the
sound field automatically and fine-adjust the
sound field data manually.
1 Switch on the receiver and your TV.
Use  RECEIVER to switch on.
• If headphones are connected to the
receiver, disconnect them.
2 Press on the remote control,
RECEIVER
then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use /// and
ENTER to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
• Press HOME MENU at any time to exit the
HOME MENU.
Note
1 Make sure not to switch off the power when using the HOME MENU.
2 You can't use the HOME MENU when the iPod/USB or SIRIUS Radio input function is selected. When you set ZONE
2 to ON (page 69), you can't use the HOME MENU.
1
2
3 Select 'Advanced MCACC' from the
HOME MENU, then press ENTER.
HOME MENU
A/V RECEIVER
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
Exit
4 Select the setting you want to adjust.
1.Advanced MCACC
A/V RECEIVER
a. Full Auto MCACC
b. Auto MCACC
c. Manual MCACC
d. Demo
Exit
• Full Auto MCACC – See Automatically
setting up for surround sound (Auto
MCACC) on page 37 for a quick and
effective automatic surround setup.
• Auto MCACC – See Automatic MCACC
(Expert) on page 78 for a more detailed
MCACC setup.
• Manual MCACC – Fine-tunes your speaker
settings and customize the Acoustic
Calibration EQ (see Manual MCACC setup
on page 82).
• Demo – No settings are saved and no
errors occur. When the speakers are
connected to this receiver, the test tone is
output repeatedly. Press RETURN to
cancel the test tone.
10
Return
Return
77
En