Basic Setup; Switching The Speaker Impedance; Changing The Osd Display Language; C. Osd Language - Pioneer VSX 1019AH-K - AV Receiver - Gloss Operating Instructions Manual

04

Basic Setup

Chapter 4:
Basic Setup

Switching the speaker impedance

We recommend using speakers of 8 Ω with this
system, but it is possible to switch the
impedance setting if you plan to use speakers
with a 6 Ω impedance rating.
1 Switch the receiver into standby.
2 While holding down ENTER on the front
panel, press  STANDBY/ON.
The display shows RESET  NO .
Use TUNE +/– (or / on the remote control)
to select SPEAKER  8Ω , and then use
PRESET +/– (or / on the remote control) to
select SPEAKER 8Ω or SPEAKER 6Ω.
• SPEAKER 8Ω – Use this setting if your
speakers are rated at 8 Ω or more.
• SPEAKER 6Ω – Use this setting if your
speakers are rated at 6 Ω.
Changing the OSD display
language (OSD Language)
The language used on the on-screen display
can be changed.
• The explanations in these operating
instructions are for when English is
selected for the OSD.
RECEIVER
1 Press
then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use /// and
ENTER to navigate through the screens and
select menu items. Press RETURN to exit the
current menu.
36
En
on the remote control,
2 Select 'System Setup' from the HOME
MENU.
3 Select 'OSD Language' from the System
Setup menu.
4.SystemSetup
A/V RECEIVER
a.Manual SP Setup
b. Input Setup

c. OSD Language

d. Other Setup
Language : English
Exit
Exit
4 Select the desired language.
• English
• French
• German
• Italian
• Spanish
• Dutch
• Russian
5 Select 'OK' to change the language.
4c.OSD Language
A/V RECEIVER
Language : English
OK
Exit
The setting is completed and the System Setup
menu reappears automatically.
4c.OSD Language
A/V RECEIVER
Return
OK
Return
Return