Other Features Settings - Toshiba 37AV600E - REGZA -37" HD Ready LCD MultiSystem TV PAL/NTSC Owner's Manual

Other features settings

Selecting the timer menu
The Timer is especially useful if you want the TV
to turn itself on or off after a selected period of
time.
1
Press MENU, then press I or i to display the
TIMER menu.
Sleep Timer
On Timer
On Timer Position
MENU Back
2
Press u or U to select the required timer
mode (Sleep timer (Turn off the TV) or On
timer).
3
Press the Number buttons (0-9), I or i to set
the On or Off delay time.
On timer:
The timer display will set by 10 minutes, up to
12 hours and 50 minutes.
Sleep timer:
The time display will set by 10 minutes, up to
4 hours.
4
When setting the On timer, press u or U to
select the On timer Position and enter the
programme position number you want to
watch. Press EXIT to exit the menu. Set the
Standby mode by pressing 1 on the remote
control or ! on the TV.
Activation of the Timer is indicated by the
green 4 On timer indicator, on the front of the
TV (- page 9).
Notes:
• The TV will automatically turn itself off after
approximately 2 hours if you do not operate the
TV after turned on by on timer function.
• If you press and hold I or i to set the On delay
time, the timer display will set by 30 minutes,
up to 12 hours 30 minutes or Sleep delay time,
the timer display will set by 30 minutes, up to 4
hours.
22
Using the TV's features
TIMER
0:00
00:00
0
EXIT Watch TV
Using the auto format
When the TV receives a true HDMI signal picture
and the auto format is On, it will automatically be
displayed in HDMI signal format, irrespective of
the TV's previous setting.
1
Press MENU, then press I or i to display the
FUNCTION menu.
Teletext
Teletext language
Auto format
4:3 stretch
Blue screen
Side panel
MENU
Back
2
Press u or U to select Auto format, then
press I or i to select On or Off.
Activating the 4:3 stretch
When 4:3 stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
1
From the FUNCTION menu, press u or U to
select 4:3 stretch.
2
Press I or i to select On or Off.
Note:
In HDMI signal format, this function is available.
Activating blue screen
With the blue screen function On, the screen
will automatically turn blue and the sound will be
muted when no signal is being received.
1
From the FUNCTION menu, press u or U to
select Blue screen.
2
Press I or i to select On or Off.
Note:
In the PC input mode or teletext mode (- page
24), this function is not available.
Adjusting the brightness of side panel
You can adjust the brightness of side panel in
14:9 or 4:3, etc. mode.
1
From the FUNCTION menu, press u or U to
select Side panel.
2
Press I or i to adjust the settings as required.
Side panel
FUNCTION
Auto
1
On
Off
On
1
EXIT
Watch TV
1