Table of Contents
Advertisement
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programmes are received.
• Use the menu: SOUND
• Use the item: Dual
Notes:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status remains even if the TV
is turned off .
Selecting the stereo programmes
When a stereo programme is received, d Stereo
appears and press s .
• Use modes: Stereo and Mono
Selecting the bilingual programmes
When a bilingual programme is received, j Dual
appears and press s .
Sound to be heard
Display
German stereo/
NICAM
bilingual broadcast
Sub I sound
j Dual 1
Main sound
Sub II sound
J Dual 2
Sub sound
e Mono
Main sound
—
Note:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in
the low sound volume level, setting the e Mono 2
mode will mitigate the problem.
When a monaural programme is received, e Mono
appears and press s .
• Use modes: Mono 1 and Mono 2
Note:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
e Mono 2 mode.
Adjusting the sound quality
You can adjust the basic sound quality.
• Use the menu: SOUND
• Use items: Bass, Treble and Balance
Using the Power Bass Booster
Power Bass Booster helps to create rich bass.
• Use menus: SOUND and Power Bass Booster
• Use items: Super, Normal and Off
Other features settings
Setting the On Timer and Sleep Timer
The Timer is especially useful if you want the TV to
turn itself on or off after a selected period of time.
• Use the menu: APPLICATIONS
• Use items: On Timer and Sleep Timer
• Use the button: OK button, Number buttons (0-
9), and
Confi gure the following settings in On Timer:
Enable On Timer: Select On or Off .
Input: Select an input source.
Position: Select a channel.
Volume: Select a volume.
Time Until Power On: Set a time until the timer
turns on.
After configuring the settings, select Done and
press OK.
Press EXIT to exit the menu. Set the Standby
mode by pressing 1 on the remote control or !
on the TV.
Note:
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
Using the Auto Format
When the TV receives a true HDMI signal picture
and the Auto Format is On, it will automatically be
displayed in HDMI signal format, irrespective of the
TV’s previous setting.
• Use the menu: PREFERENCES and Display
Settings
• Use the item: Auto Format
Activating the 4:3 Stretch
When 4:3 Stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
• Use the menu: PREFERENCES and Display
Settings
• Use the item: 4:3 Stretch
Note:
In HDMI signal format, this function is available.
Activating Blue Screen
With the Blue Screen function On, the screen
will automatically turn blue and the sound will be
muted when no signal is being received.
• Use the menu: PREFERENCES
• Use the item: Blue Screen
Note:
The sound is not muted when selsecting the external
input.
Page 14
Hide quick links:
Advertisement
Table of Contents
