Ready Led - Fujitsu MAV2036RC - 36.7 GB Hard Drive Installation Requirements

Installation Requirements
Table 4.2 Interface connector (SAS plug) signal allocation:CN1
Pin No.
S1 GND
S2 RP+
S3 RP-
S4 GND
S5 TP-
S6 TP+
S7 GND
Note1
S8 GND
Note1
S9 Reserved (not used)
Note1
S10 Reserved (not used)
Note1
S11 GND
Note1
S12 Reserved (not used)
Note1
S13 Reserved (not used)
Note1
S14 GND
Note2
P1 Reserved (not used)
Note2
P2 Reserved (not used)
Note2
P3 Reserved (not used)
P4 GND
P5 GND
P6 GND
P7 +5V-Charge
P8 +5V
P9 +5V
P10 GND
P11

READY LED

P12 GND
P13 +12V-Charge
P14 +12V
P15 +12V
Note 1) S8 - S14 are SAS Secondary Port signals, and not used on MAV2073RC and MAV2036RC.
Note 2) P1 to P3 are 3.3V power supply input and pre-charge signals, and not used on MAV2073RC and
MAV2036RC.
4-10
Signal
GND for SAS Primary Port
SAS Primary Port Receive(positive) signal
SAS Primary Port Receive(negative) signal
GND for SAS Primary Port
SAS Primary Port Transmit(negative) signal
SAS Primary Port Transmit(positive) signal
GND for SAS Primary Port
GND for SAS Secondary Port
Not used
Not used
GND for SAS Secondary Port
Not used
Not used
GND for SAS Secondary Port
Not used
Not used
Not used
GROUND
GROUND
GROUND
Pre-charge pin for +5V
+5V power supply input
+5V power supply input
GROUND
READY LED output
GROUND
Pre-charge pin for +12V
+12V power supply input
+12V power supply input
Description
C141-E219